A type wind generator 300W wind power street lamp special small wind power supply

●The casing is made of A3 steel, with small volume, light weight, beautiful appearance and low running vibration. ● Flange installation, good strength, convenient installation and maintenance. ● The blade is made of reinforced glass steel material, which has high starting wind speed and high utilization coefficient of wind energy. ● The maximum power tracking intelligent controller can be selected to effectively adjust the current and voltage.

Products Details

●Safety: The main stress points of the blade are concentrated on the hub, so the problems of blade fallirng off, fracture and blade flying out have been better solved. ● Radius of gyration: Due to its different design structure and operation principle, it has a smaller radius of gyration than other forms of wind turbines, saving space and improving efficiency. ●Generation curve characteristics: The start-up wind speed is lower than that of other types of wind turbines, and the rise of power generation is relatively gentle. Therefore, within the wind speed range of 5~8m, its power generation is 10%~30% higher than that of other types of wind turbines. ● Braking device: The blade itself has speed protection, and can be equipped with mechanical manual brake and electronic automatic brake. In areas without typhoon and super gust, only manual brake needs to be set. ●The casing is made of A3 steel, with small volume, light weight, beautiful appearance and low running vibration. ● Flange installation, good strength, convenient installation and maintenance. ●The blade is made of reinforced FRP, equipped with optimized aerodynamic shape design and structural design, with start-up wind speed and high wind energy utilization coefficient, which increases the annual power generation. ● The tail rudder adopts automatic windward design and straight tail type, with strong typhoon resistance and safe and reliable operation. generator uses the patented Nd-Fe-B permanent magnet rotor alternator. The special stator and rotor design can effectively reduce the resistance torque of the generator. At the same time, the wind turbine has better matching characteristics with the generator and the reliability of unit operation. ● The maximum power tracking intelligent controller can be selected to effectively adjust the current and voltage.

Product Features

Technical Parameters

Model WT-A-100W WT-A-200W WT-A-300W WT-A-400W
Rated power 100W 200W 300W 400W
Maximum power 150W 250W 350W 450W
Rated voltage 12V/24V 12V/24V 12V/24V 24V
Start-up wind speed 2.0m/s 2.0m/s 2.0m/s 2.0m/s
Rated wind speed 13m/s 13m/s 13m/s 13m/s
Survival wind speed 35m/s 35m/s 35m/s 35m/s
Number of blades 3/5 pieces
Blade material nylon fiber
Body material aluminium alloy
Generator three phase AC permanent magnet generator/maglev generator
Control system electromagnetic brake
Yaw mode automatic windward angle
Lubrication mode self lubrication
Tower form guyed tower/independent tower
Working temperature -40°C-80°C

Applications

Working Principle

The principle of wind power generation is to use the wind to drive the rotation of the windmill blades, and then through the speed machine to increase the rotation speed, to promote the generator to generate electricity.         Wind power system is very efficient, but it is not only composed of a generator head, but a small system with a certain amount of technology: wind generator + charger + inverter. Wind turbine by the nose, rotating body, tail, blade composition. Each part is important. The functions of each part are: the blade is used to receive the wind and convert it into electricity through the nose; The tail keeps the blades facing the direction of the incoming wind to obtain maximum wind power; The rotating body can make the nose rotate flexibly to realize the function of adjusting the direction of the tail. The rotor of the nose is a permanent magnet, and the stator windings cut the magnetic force lines to generate electric energy.         Because of the unstable air volume of wind turbine, its output is 13 ~ 25V alternating current, which must be rectified by the charger, and then charged to the storage battery, so that the electric energy generated by wind turbine into chemical energy. Then with a protective circuit of the inverter power supply, the chemical energy in the battery into 220V AC mains, in order to ensure stable use.1、wind turbines body 2、flange seat 3、steel pipe support 4、wind turbine shaft 5、wind wheel hub 6、wind turbines piece 7、resistance of pine nut 8、fairing9、bolt 10、flat washer 11、elastic washer 12、nut 13、stainless steel screw 14、resistance of pine nuts 15、stern rudder hull

Household power generation

Street lighting

Agricultural electricity consumption

Offshore wind power

Mountain area power supply

Landscape of Tourism

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours